Portal of German Space SMEs in the AKRK

Logo Best-of-space

Spearhead of technology

Space travel places the highest demands on technology that exist on Earth. Because trust requires function. This applies from weather forecasting to TV reception, from environmental observation to navigation:

  • Whether a satellite finds its way to the exact designated position at an altitude of 36,000 kilometers,
  • whether it delivers precisely defined performance from there for at least fifteen years,
  • whether a spacecraft, half a billion kilometers away, sets its lander down on a comet,
  • whether a crew entrusts their lives for months to the functions of a space station.

Every technical detail behind such achievements in spaceflight is intelligence embodied in hardware

Intelligence that functions in space is a prerequisite for superior capabilities on Earth. These capabilities are decisive from a civil-economic or military perspective depending on the spirit of the times and the situation—but they are always decisive from a political one. It is therefore only logical that spaceflight, today as at its beginnings in the last century, is seen, established, and promoted by the politics of every country as the ultimate indicator of the technological maturity of the national economy and its “non-dependency” (ESA).

To date, more than forty of the nearly four million SMEs in Germany have qualified for development, production, and service activities in the service of spaceflight and have joined together in the AKRK* interest group established by the DLR. In detail, they cover around 80 percent of all required capabilities in the highest quality class this side of system integration—capabilities that make spaceflight possible in the first place: some with equipment such as software, mechanics, and electronics, others with complete subsystems, and a few also with small satellites. As independent entities, they are committed to no priority other than uncompromising quality and one hundred percent loyalty to each of their clients.

The success of a large number of world-class national and international missions also rests on the participation of German space SMEs in the AKRK*.

* The AKRK (Arbeitskreis Raumfahrt-KMU) is the organization for medium-sized space companies in Germany, established by the DLR with the support of the BMWi. The AKRK operates independently and in partnership with politics and institutions; all members have equal rights, as the AKRK only admits independent SMEs. There are no keys for weighting votes according to company size, whether official or merely through the normative power of the factual.

Milestones of Success

Space missions|Mission Heritage

Mission Year: 2026

Mission:

Lunar Gateway I-HAB

The new space station for lunar orbit.

Category:
Space Missions|Mission Heritage

Learn more

Project:
Turnkey development of all internal secondary structures of the habitation module

Mission Year: 2025

Mission:

Galileo 2G

Europe´s navigation system 2nd Generation

Category:
Space Missions|Mission Heritage

Learn more

Project:
Launcher selection and orbit injection

Mission Year: 2025

Mission:

MMX

Japanese Mars Moon eXploration

Category:
Space Missions|Mission Heritage

Learn more

Mission Year: 2022

Mission:

ExoMars 2022

Exo-biological exploration and sample extraction on the martian surface

Category:
Space Missions|Mission Heritage

Learn more

Project:
WISDOM Antenne

The actual antenna geometry (copper) is introduced after the laminate manufacturing by etching.

Project:
DMA boom

The deployable mast assembly (DMA) consists of a CFRP boom with titanium fittings, which support the Rover’s stereo camera system.

Project:
Acoustic, shock und fracture control analysis for the primary structure

Mission Year: 2022

Mission:

JUICE

Exploration of Jupiter and its icy moons

Category:
Space Missions|Mission Heritage

Learn more

Project:
MLI for magnetometer

Project:
MagBoom MLI

Project:
Mass Memory

Receiving, formatting and storing of science data from multiple instruments

Mission Year: 2022

Mission:

Kompsat 7

Cartography, land use and planning, disaster monitoring

Category:
Space Missions|Mission Heritage

Learn more

Project:
Power Supply Unit (PSU)

The PSU is a unique power supply system, for supplying power to the panchromatic band camera and the multispectral camera. It has 24 precise power outputs, as well as a TC/TM interface and regulated heater outputs. The power supply consists of a total of 8 individually designed, manufactured and tested modules.

Mission Year: 2021

Mission:

NISAR

NASA-ISRO Synthetic Aperture Radar

Category:
Space Missions|Mission Heritage

Learn more

Mission Year: 2021

Mission:

PLATO

PLAnetary Transits and Oscillations of stars (PLATO) is the third medium-class mission in ESA's Cosmic Vision programme.

Category:
Space Missions|Mission Heritage

Learn more

Project:
Ancillary Electronic Unit (AEU)

The AEU supplies power to both the “normal” cameras (N-AEU) and the “fast” cameras (F-AEU). The N-AEU consists of 6 sophisticated power supply modules, 2 command and control modules, and an internal supply module. The F-AEU consists of 1 sophisticated power supply module, 2 command and control modules, and 1 internal supply module.

Mission Year: 2020

Mission:

STEP

Category:
Space Missions|Mission Heritage

Learn more

Project:
Reaction Wheel RW90

Reaction Wheel to control satellite attitude

Mission Year: 2020

Mission:

CMM-1

China's First Mars Exploration Mission

Category:
Space Missions|Mission Heritage

Mission Year: 2020

Mission:

Euclid

Space telescope to explore the „dark universe“

Category:
Space Missions|Mission Heritage

Learn more

Project:
MLI for the sunshield

Project:
MGSE for PLM Batch 1

Project:
Ka-Band antenna

Project:
Secondary structures for STCS

Project:
MGSE for the sunshield

Project:
HRA reflector

INVENT will manufacture the Euclid HGA reflector assembly.

Project:
Straylight analysis of the SSH baffle

Mission Year: 2020

Mission:

MTG

Europe weather satellite of third generation

Category:
Space Missions|Mission Heritage

Learn more

Project:
Support in the structural analysis of the primary structure

Project:
Star Sensor Bracket

Project:
Radiators for the Sentinel 4 Instrument

Project:
MLI for the Sentinel 4 Instrument

Project:
MLI for the MTO mirrors

Project:
DC/DC Converter

A DC/DC-Converter converts electrical voltage from a particular level to a different level

Project:
Design and manufacturing of support structures

INVENT is in charge of the development and manufacturing of Meteosat Third Generation (MTG) support structures which includes the helium tank, mid thruster, reaction wheel and panel supports.

Mission Year: 2020

Mission:

Sentinel 5 auf MetOp-SG

Multi-functional satellite, part of the European earth observation program „Copernicus“

Category:
Space Missions|Mission Heritage

Learn more

Project:
Magentic Torquer

These devices interact with the Earth’s magnetic field and create control torque, which can be adjusted to the required value. Combined with one or more reaction wheels, they provide all the control you need to maintain your spacecraft’s attitude, from low-Earth orbit up to geo-stationary orbit. And, unlike thrusters, torquers do not need valuable consumables, are low power components and high reliable.

Project:
Magnetometer

These devices interact with the Earth’s magnetic field and create control torque, which can be adjusted to the required value. Combined with one or more reaction wheels, they provide all the control you need to maintain your spacecraft’s attitude, from low-Earth orbit up to geo-stationary orbit. And, unlike thrusters, torquers do not need valuable consumables, are low power components and high reliable.

Project:
Magentic Torquer

These devices interact with the Earth’s magnetic field and create control torque, which can be adjusted to the required value. Combined with one or more reaction wheels, they provide all the control you need to maintain your spacecraft’s attitude, from low-Earth orbit up to geo-stationary orbit. And, unlike thrusters, torquers do not need valuable consumables, are low power components and high reliable.

Mission Year: 2020

Mission:

Sentinel-6 / Jason-CS

Ocean Topographie

Category:
Space Missions|Mission Heritage

Learn more

Project:
Support in the structural analysis of the primary structure

Mission Year: 2020

Mission:

Proba-III

Low-cost mission for the validation of technologies and the deployment of scientific instruments

Category:
Space Missions|Mission Heritage

Project:
High Accuracy Measurement System

ECM is building an extremely precise instrument made of HB-Cesic for this ESA mission, designed to measure the distance between the two satellites. The test model is currently undergoing final processing at ECM.

Mission Year: 2019

Mission:

Sentinel 4 at MTG

Earth Observation

Category:
Space Missions|Mission Heritage

Learn more

Project:
Manufacturing of instrument structure

Project:
Design and development support

Project:
OIMS Primärstruktur, TSA Hexapod

The Sentinel 4 UVN OIMS consists of CFRP sandwich panels, monolithic CFRP, GFRP and metallic parts. The Nadir Baffle (service temp. 140 °C) incl. CFRP vanes is fully bonded by adhesive. The TSA hexapod structure is made of CFRP struts incl. Titanium fittings.

Project:
Mechanical Ground Support Equipment (MGSE)

Handling of optical instrument Sentinel-4 UVN

Project:
Radiators with different coatings

Project:
External and internal MLI for the S-4 instrument

Project:
Instrument Radiator Assembly

Project:
DC/DC Converter

A DC/DC-Converter converts electrical voltage from a particular level to a different level

Project:
Structures and Thermal Analysis payload equipment

Mission Year: 2019

Mission:

Earth Care

European mission measuring clouds, aerosols, radiation

Category:
Space Missions|Mission Heritage

Project:
Magnetic Torquer

These devices interact with the Earth’s magnetic field and create control torque, which can be adjusted to the required value. Combined with one or more reaction wheels, they provide all the control you need to maintain your spacecraft’s attitude, from low-Earth orbit up to geo-stationary orbit. And, unlike thrusters, torquers do not need valuable consumables, are low power components and high reliable.

Project:
Magnetometer

The Magnetometer is an instrument for measuring three-dimensional magnetic fields. It is based on the fluxgate principle, using three independent ring-core sensor heads for each orthogonal axis.

Project:
Magentic Torquer

These devices interact with the Earth’s magnetic field and create control torque, which can be adjusted to the required value. Combined with one or more reaction wheels, they provide all the control you need to maintain your spacecraft’s attitude, from low-Earth orbit up to geo-stationary orbit. And, unlike thrusters, torquers do not need valuable consumables, are low power components and high reliable.

Project:
DC/DC Converter

A DC/DC-Converter converts electrical voltage from a particular level to a different level.

Mission Year: 2019

Mission:

H2Sat Heinrich-Hertz

GermanTelecommunications satellite mission

Category:
Space Missions|Mission Heritage

Learn more

Project:
Ka-Band north beam antenna structure

Project:
Fraunhofer On-Board Processor (FOBP)

reconfigurable on-board processor (OBP) for communication applications

Project:
KERAMIS GEO

Ceramic Microwave Circuits for Satellite Communication

Project:
MLI and sunshield for the antenna

Project:
Ka-Band North Beam Antenna

Project:
Support in the structural analysis of the primary structure

Mission Year: 2019

Mission:

MERLIN

German-French satellite, measuring the concentration of methane-gas

Category:
Space Missions|Mission Heritage

Learn more

Mission Year: 2018

Mission:

BepiColombo MMO

Mercury Magnetospheric Orbiter

Category:
Space Missions|Mission Heritage

Project:
MERTIS Mercury Radiometer and Thermal Infrared Spectrometer

Optical components, baffle system for straylight reflection

Mission Year: 2018

Mission:

EnMap

Hyperspectrometric EO mission

Category:
Space Missions|Mission Heritage

Learn more

Project:
Star Sensor Bracket

Project:
Mass Memory Unit – Instrument Control Unit

  • Receiving, formatting and storing of science data
  • Instrument Control

Project:
Optical Baffle

Project:
Instrument Structure Engineering Support

Project:
MLI for FAD Mechanism

Project:
Instrument Power Unit Power Distribution Unit

Ultra accurate power supply and distribution system for a complete optival high-precision instrument A Power Distribution Unit distributes electrical energy to a number of equipments.

Project:
Software for calibration and alignment

Mission Year: 2018

Mission:

Esail

Identification and tracking of seafaring vessels on Earth

Category:
Space Missions|Mission Heritage

Learn more

Project:
Magnetic Torquer

These devices interact with the Earth’s magnetic field and create control torque, which can be adjusted to the required value. Combined with one or more reaction wheels, they provide all the control you need to maintain your spacecraft’s attitude, from low-Earth orbit up to geo-stationary orbit. And, unlike thrusters, torquers do not need valuable consumables, are low power components and high reliable.

Project:
Magnetometer

The Magnetometer is an instrument for measuring three-dimensional magnetic fields. It is based on the fluxgate principle, using three independent ring-core sensor heads for each orthogonal axis.

Project:
Magentic Torquer

These devices interact with the Earth’s magnetic field and create control torque, which can be adjusted to the required value. Combined with one or more reaction wheels, they provide all the control you need to maintain your spacecraft’s attitude, from low-Earth orbit up to geo-stationary orbit. And, unlike thrusters, torquers do not need valuable consumables, are low power components and high reliable.

Project:
Panel Mechanism

Gyros, ADCS I/F units, Magnetometers, Reaction Wheels und GPS

Mission Year: 2018

Mission:

GEO-KOMPSAT-2A

Earth observation satellite of Korea

Category:
Space Missions|Mission Heritage

Learn more

Mission Year: 2018

Mission:

InSight HP3

Mars mission with seismometer and heat probe.

Category:
Space Missions|Mission Heritage

Learn more

Mission Year: 2017

Mission:

CHEOPS

Mission to measure the density of exoplanets/Super-Earths (CHaracterising ExOPlanet Satellite)

Category:
Space Missions|Mission Heritage

Project:
Magnetic Torquer

These devices interact with the Earth’s magnetic field and create control torque, which can be adjusted to the required value. Combined with one or more reaction wheels, they provide all the control you need to maintain your spacecraft’s attitude, from low-Earth orbit up to geo-stationary orbit. And, unlike thrusters, torquers do not need valuable consumables, are low power components and high reliable.

Project:
Magentic Torquer

EN: Diese Vorrichtungen interagieren mit dem Magnetfeld der Erde und erzeugen ein Steuerdrehmoment, das auf den gewünschten Wert eingestellt werden kann. In Kombination mit einem oder mehreren Reaktionsrädern , bieten sie die gewünschte Kontrolle, um den Raumflugkörper richtig auszurichten, von Low-Earth Orbit bis hin zum geostationären Orbit. Im Gegensatz zu Triebwerken, brauchen Magnet Torquer keinen Kraftstoff und sind als Low-Power-Komponenten und sehr zuverlässig.

Project:
Magnetometer

The Magnetometer is an instrument for measuring three-dimensional magnetic fields. It is based on the fluxgate principle, using three independent ring-core sensor heads for each orthogonal axis.

Project:
MLI for the telescope

EN

Mission Year: 2017

Mission:

ADM-AEOLUS

Meteorology and Environment Mission

Category:
Space Missions|Mission Heritage

Project:
ALADIN Sonnenschutz Fachwerk

The ALADIN sun baffle consists of a CFRP strut framework. Each strut features CFRP inserts (to cover CTE mismatch) for the strut connection.

Mission Year: 2017

Mission:

BepiColombo MPO

Europe's Mission to Mercury (Mercury Planetary Orbiter)

Category:
Space Missions|Mission Heritage

Project:
Etalon Cage

Etalon Cage for MSASI Instrument on MMO Spacecraft (Japan)

Project:
Pointing Mirros (MERTIS)

Project:
MERTIS (Mercury Radiometer and Thermal Infrared Spectrometer)

MERTIS, imaging spectrometer for surface investigation of Mercury

Project:
BELA (BepiColombo Laser Altimeter) support structures

The BELA SPU, a straylight protection unit for the BepiColombo laseraltimeter, was designed, analysed and manufactured by INVENT. The key challenges for this unit were the very small dimensions, severe mass requirements and the Gold plating on CFRP sandwich parts.

Mission Year: 2017

Mission:

DEOS

Key technologies to find, approach, catch and dispose the satellite

Category:
Space Missions|Mission Heritage

Project:
Subsystems structure

  • Mechanism
  • Thermal control
  • Energy supply
  • Attitude control
  • AIV of client satellite
  • GSE

Project:
Support GNC system

De-orbitation and risk analysis, visualization GNC console, real-time camera/LIDAR simulation

Mission Year: 2017

Mission:

eROSITA

X-ray teleskope to detect dark energy and its effects on the expansion of the universe

Category:
Space Missions|Mission Heritage

Learn more

Project:
MLI for the complete telescope

Multilayer Insulation

Project:
Primary structure

The eROSITA structure is mainly built out of adhesive bonded CFRP/Aluminum sandwich panels for the optical bench and Aluminum/Aluminum sandwich panels for   radiators. Further on, CFRP struts (hexapod for opt. bench), GFRP struts for the radiator truss work and monolithic CFRP parts have been developed and assembled by INVENT.

Mission Year: 2017

Mission:

Eu:CROPIS

Langzeittest von biologischen Lebenserhaltungssystemen

Category:
Space Missions|Mission Heritage

Learn more

Project:
On-board Computer

Satellite’s Central Computer

Mission Year: 2017

Mission:

GökTürk

Dual use EO-satellite, Turkey

Category:
Space Missions|Mission Heritage

Learn more

Project:
Magnetic Torquer

These devices interact with the Earth’s magnetic field and create control torque, which can be adjusted to the required value. Combined with one or more reaction wheels, they provide all the control you need to maintain your spacecraft’s attitude, from low-Earth orbit up to geo-stationary orbit. And, unlike thrusters, torquers do not need valuable consumables, are low power components and high reliable.

Project:
Magnetometer

The Magnetometer is an instrument for measuring three-dimensional magnetic fields. It is based on the fluxgate principle, using three independent ring-core sensor heads for each orthogonal axis.

Project:
Magentic Torquer

These devices interact with the Earth’s magnetic field and create control torque, which can be adjusted to the required value. Combined with one or more reaction wheels, they provide all the control you need to maintain your spacecraft’s attitude, from low-Earth orbit up to geo-stationary orbit. And, unlike thrusters, torquers do not need valuable consumables, are low power components and high reliable.

Project:
Focal Plane

Project:
Kryptosystem

On-board and Ground Crypto System

Mission Year: 2017

Mission:

GRACE-FollowOn

Satellite-twin pair for climate research

Category:
Space Missions|Mission Heritage

Learn more

Project:
Thermal plate

INVENT manufactured thermal plates from highly conductive CFRP (featuring K13 pitch fibre) for the GRACE-FO satellite.

Project:
PDU Power Distribution Unit

A Power Distribution Unit distributes electrical energy in a complete instrument or satellite.

Project:
MLI for an external instrument

Mission Year: 2017

Mission:

ICARUS

Observation of global migration of small animals

Category:
Space Missions|Mission Heritage

Learn more

Mission Year: 2017

Mission:

ICEsat-2

Ice, Cloud, and land Elevation Satellite-2

Category:
Space Missions|Mission Heritage

Learn more

Project:
Magnetic Torquer

These devices interact with the Earth’s magnetic field and create control torque, which can be adjusted to the required value. Combined with one or more reaction wheels, they provide all the control you need to maintain your spacecraft’s attitude, from low-Earth orbit up to geo-stationary orbit. And, unlike thrusters, torquers do not need valuable consumables, are low power components and high reliable.

Project:
Magnetometer

The Magnetometer is an instrument for measuring three-dimensional magnetic fields. It is based on the fluxgate principle, using three independent ring-core sensor heads for each orthogonal axis.

Project:
Magentic Torquer

These devices interact with the Earth’s magnetic field and create control torque, which can be adjusted to the required value. Combined with one or more reaction wheels, they provide all the control you need to maintain your spacecraft’s attitude, from low-Earth orbit up to geo-stationary orbit. And, unlike thrusters, torquers do not need valuable consumables, are low power components and high reliable.

Mission Year: 2017

Mission:

ICON

Ionospheric Connection Explorer

Category:
Space Missions|Mission Heritage

Learn more

Project:
Magnetic Torquer

These devices interact with the Earth’s magnetic field and create control torque, which can be adjusted to the required value. Combined with one or more reaction wheels, they provide all the control you need to maintain your spacecraft’s attitude, from low-Earth orbit up to geo-stationary orbit. And, unlike thrusters, torquers do not need valuable consumables, are low power components and high reliable.

Project:
Magnetometer

The Magnetometer is an instrument for measuring three-dimensional magnetic fields. It is based on the fluxgate principle, using three independent ring-core sensor heads for each orthogonal axis.

Project:
Magentic Torquer

These devices interact with the Earth’s magnetic field and create control torque, which can be adjusted to the required value. Combined with one or more reaction wheels, they provide all the control you need to maintain your spacecraft’s attitude, from low-Earth orbit up to geo-stationary orbit. And, unlike thrusters, torquers do not need valuable consumables, are low power components and high reliable.

Mission Year: 2017

Mission:

SARah (NGSAR)

Radar observation German Bundeswehr

Category:
Space Missions|Mission Heritage

Learn more

Project:
A Latching Current Limiter operates as a electronic fuse in order to protect a particular assembly

Project:
Auxiliary Power Supply

An auxiliary Power Supply converts electrical voltage from a particular level to a different level.

Project:
AOCS SCOE

special check-out equipment for AOCS

Project:
Kryptosystem

On-board and Ground Crypto System

Mission Year: 2017

Mission:

Solar Orbiter

Satellite to explore the sun from nearest possible distance

Category:
Space Missions|Mission Heritage

Learn more

Project:
Design and manufacturing SO/PHI Instrument Baseplate

Project:
STIX (Spectrometer/Telescope for Imaging X-rays)

Project:
MLI for the thermal dummies

Mission Year: 2016

Mission:

ASTRO- H

Astronomical x-ray mission, Japan

Category:
Space Missions|Mission Heritage

Project:
Magentic Torquer

These devices interact with the Earth’s magnetic field and create control torque, which can be adjusted to the required value. Combined with one or more reaction wheels, they provide all the control you need to maintain your spacecraft’s attitude, from low-Earth orbit up to geo-stationary orbit. And, unlike thrusters, torquers do not need valuable consumables, are low power components and high reliable.

Project:
Magnetometer

The Magnetometer is an instrument for measuring three-dimensional magnetic fields. It is based on the fluxgate principle, using three independent ring-core sensor heads for each orthogonal axis.

Project:
High Voltage Power Supply

A high voltage power supply provides high precision high voltage in the range of several thousands volt to a scientific instrument.

Mission Year: 2016

Mission:

Baumanets 2

Experimental satellite for On Orbit Verification of new technologies

Category:
Space Missions|Mission Heritage

Project:
Reaction Wheel RW90

Reaction Wheel to control satellite attitude

Mission Year: 2016

Mission:

BeeSat-4

Space Verification of technologies for picosatellites

Category:
Space Missions|Mission Heritage

Project:
Reaction Wheel RW1

Reaction Wheel to control satellite attitude

Mission Year: 2016

Mission:

BIROS

ACS, Technology Demonstration

Category:
Space Missions|Mission Heritage

Project:
High torque reaction wheel electronics

Project:
AOCS Magnetometer

Project:
Reaction Wheel 90; AGS-1

RW90 and high integrated rate sensor AGS-1 to control satellite attitude

Project:
Camera structure

Project:
Magentic Torquer

Diese Vorrichtungen interagieren mit dem Magnetfeld der Erde und erzeugen ein Steuerdrehmoment, das auf den gewünschten Wert eingestellt werden kann. In Kombination mit einem These devices interact with the Earth’s magnetic field and create control torque, which can be adjusted to the required value. Combined with one or more reaction wheels, they provide all the control you need to maintain your spacecraft’s attitude, from low-Earth orbit up to geo-stationary orbit. And, unlike thrusters, torquers do not need valuable consumables, are low power components and high reliable.

Project:
Magnetometer

The Magnetometer is an instrument for measuring three-dimensional magnetic fields. It is based on the fluxgate principle, using three independent ring-core sensor heads for each orthogonal axis.

Mission Year: 2016

Mission:

EDRS

European Data Relais Satellite (Communication Satellite)

Category:
Space Missions|Mission Heritage

Project:
Ground Crypto Unit

De-/Encryption Unit of the ground segment

Mission Year: 2016

Mission:

EDRS-C

European Data Relais Satellite (Communication Satellite)

Category:
Space Missions|Mission Heritage

Learn more

Project:
Design and manufacturing of support structures

Project:
Design and analysis of MGSE

Project:
Support in the structural analysis of the primary structure

Mission Year: 2016

Mission:

ESEO

Measure radiation levels and test technologies for future missions

Category:
Space Missions|Mission Heritage

Learn more

Project:
Reaction Wheel RW90

Reaction Wheel to control satellite attitude

Mission Year: 2016

Mission:

ExoMars 2016

Europe’s mission to Mars

Category:
Space Missions|Mission Heritage

Learn more

Project:
Design and analysis of MGSE

Project:
Support in the structural analysis of the primary structure

Project:
Payload Data Handling Unit

Design & Development of the Mass Memory Unit

Project:
MLI for Cassis Instrument

Multilayer Insulations; HPS equipped the whole EDM Module inside and outside with MLI and will land with 10kg MLI on Martian surface

Project:
MLI for EDM Entry Module

Multilayer Insulations; HPS equipped the whole EDM Module inside and outside with MLI and will land with 10kg MLI on Martian surface

Project:
Primary and tertiary structures

The ExoMars load-bearing structure of the orbiter mainly consists of CFRP & aluminum sandwich with >5300 metallic inserts, heterogeneous aluminum cores, structural and thermal doublers, grounding and painting   (next to the central tube – not by INVENT). Additionally various CFRP, aluminum and titanium brackets for reaction wheels, LGA, He-tanks and star trackers were developed and manufactured.

Mission Year: 2016

Mission:

LAPAN-A3 / LiSat

Remote sensing microsatellite to monitor food resources in Indonesia and to provide environmental monitoring.

Category:
Space Missions|Mission Heritage

Learn more

Mission Year: 2016

Mission:

LAPAN-A4

Indonesian fourth's microsatellite for earth observation using multispectral imager and support global maritime traffic monitoring using space-based Automatic Identification System (AIS) receiver.

Category:
Space Missions|Mission Heritage

Learn more

Project:
Magnetometer

The Magnetometer is an instrument for measuring three-dimensional magnetic fields. It is based on the fluxgate principle, using three independent ring-core sensor heads for each orthogonal axis.

Mission Year: 2016

Mission:

Metop-SG

Weather and climate monitoring for Europe

Category:
Space Missions|Mission Heritage

Learn more

Project:
CAD design tertiary structures

Project:
DC/DC Converter

A DC/DC-Converter converts electrical voltage from a particular level to a different level

Project:
Command & Data Processing Unit

Control the ICI Instrument, receiving data from the instrument as well as supplying internal and external power sources

Project:
Support in the structural analysis of the primary structure

Project:
Structures and thermal analysis payload equipment

Mission Year: 2016

Mission:

Nano-JASMINE

Infrared exploration, tasks of astrometry

Category:
Space Missions|Mission Heritage

Learn more

Project:
Reaction Wheel RW1

Reaction Wheel to control satellite attitude

Mission Year: 2016

Mission:

Prisma

Innovative hyperspectral EO-system

Category:
Space Missions|Mission Heritage

Learn more

Project:
Structural analysis of platform devices

Project:
Structures and acoustic analysis for primary structure

Mission Year: 2016

Mission:

SEAM

3U CubeSat nanosatellite for measurements of magnetic and electric fields in the Earth ionosphere.

Category:
Space Missions|Mission Heritage

Learn more

Project:
PSL (PicoSatelliteLauncher)

family of PicoSatellite Launcher (PSL) ensure the safety of the CubeSat and protect the launch vehicle

Mission Year: 2016

Mission:

Sentinel 3

Earth observation

Category:
Space Missions|Mission Heritage

Learn more

Project:
Structures and thermal analysis payload equipment

Mission Year: 2016

Mission:

Sentinel-5 Precursor

Monitoring of Air Quality, Ozone and Surface UV, Climate

Category:
Space Missions|Mission Heritage

Learn more

Mission Year: 2016

Mission:

SmallGEO Hispasat AG1

Multifunctional new smal DEO-Sat generation for telecomms

Category:
Space Missions|Mission Heritage

Learn more

Project:
Testplanning and lead engineering

when conducting vibration, acoustic, and shock tests on the complete satellite.

Project:
Design and analysis of MGSE

Project:
Structures and acoustic analysis for primary structure

Mechanical test planning and on-site test lead engineering (including whole S/C).

Project:
DC/DC Converter

A DC/DC-Converter converts electrical voltage from a particular level to a different level.

Mission Year: 2016

Mission:

Tropomi

Troposphere Monitoring Instrument on Copernicus Sentinel-5

Category:
Space Missions|Mission Heritage

Learn more

Project:
Support Frame

Project:
Radiant Cooler

Mission Year: 2016

Mission:

WNISAT-1R

nanosatellite for north arctic routes and atmosphere monitoring

Category:
Space Missions|Mission Heritage

Learn more

Project:
Reaction Wheel RW90

Reaction Wheel to control satellite attitude

Mission Year: 2015

Mission:

GOMX-3

Evaluate components in space

Category:
Space Missions|Mission Heritage

Learn more

Project:
Reaction Wheel RW1 and TPL

Reaction Wheel to control satellite attitude and Triple Satellite Launcher to ensure the safety of the CubeSat and protect the launch vehicle.

Mission Year: 2015

Mission:

Lisa Pathfinder

Mission on Einstein’s gravity waves

Category:
Space Missions|Mission Heritage

Learn more

Project:
Power Conditioning Unit

A Power Conditioning Unit provides stable electrical energy to a number of equipments.

Mission Year: 2015

Mission:

NASA ESA Magnetospheric Multiscale Mission

NASA-Mission with 4 Sats to measure earth´s magnetosphere

Category:
Space Missions|Mission Heritage

Learn more

Project:
High Voltage Multiplier

A high voltage multiplexer generates from a typical bus-voltage an output voltage of several thousands volts.

Mission Year: 2015

Mission:

Nextar

NEC Standard bus satellite

Category:
Space Missions|Mission Heritage

Learn more

Project:
Magentic Torquer

These devices interact with the Earth’s magnetic field and create control torque, which can be adjusted to the required value. Combined with one or more reaction wheels, they provide all the control you need to maintain your spacecraft’s attitude, from low-Earth orbit up to geo-stationary orbit. And, unlike thrusters, torquers do not need valuable consumables, are low power components and high reliable.

Project:
Magnetometer

The Magnetometer is an instrument for measuring three-dimensional magnetic fields. It is based on the fluxgate principle, using three independent ring-core sensor heads for each orthogonal axis.

Mission Year: 2015

Mission:

Sentinel 2A/B

Sentinel-2 is an Earth observation mission developed by ESA as part of the Copernicus Programme to perform terrestrial observations in support of services such as forest monitoring, land cover changes detection, and natural disaster management.

Category:
Space Missions|Mission Heritage

Learn more

Project:
Magentic Torquer

These devices interact with the Earth’s magnetic field and create control torque, which can be adjusted to the required value. Combined with one or more reaction wheels, they provide all the control you need to maintain your spacecraft’s attitude, from low-Earth orbit up to geo-stationary orbit. And, unlike thrusters, torquers do not need valuable consumables, are low power components and high reliable.

Project:
Magnetometer

The Magnetometer is an instrument for measuring three-dimensional magnetic fields. It is based on the fluxgate principle, using three independent ring-core sensor heads for each orthogonal axis.

Project:
DC/DC Converter

A DC/DC-Converter converts electrical voltage from a particular level to a different level

Mission Year: 2015

Mission:

Tianwang-1

CubeSats constellations for space networking and communication experiments

Category:
Space Missions|Mission Heritage

Learn more

Project:
Reaction Wheel RW1

Reaction Wheel to control satellite attitude

Mission Year: 2015

Mission:

TUPEX-5

Parabolic flight campaign of TU- and process measurement data

Category:
Space Missions|Mission Heritage

Learn more

Project:
PSL (PicoSatelliteLauncher)

Family of PicoSatellite Launcher (PSL) ensure the safety of the CubeSat and protect the launch vehicle.

Mission Year: 2015

Mission:

TW-1 Mission

Chinese Tianwang-1 satellite constellation for orbit communication

Category:
Space Missions|Mission Heritage

Learn more

Project:
PSL (PicoSatelliteLauncher)

Family of PicoSatellite Launcher (PSL) ensure the safety of the CubeSat and protect the launch vehicle

Mission Year: 2014

Mission:

Formosat-5

First space program (Earth Observation) of Taiwan

Category:
Space Missions|Mission Heritage

Learn more

Project:
Aluminum sandwich panels

INVENT manufactured Aluminum/Aluminum sandwich panels incl. all inserts for the FormoSat 5 satellite.

Mission Year: 2014

Mission:

Himawari 8/9

GEO weather sats, Japan

Category:
Space Missions|Mission Heritage

Learn more

Project:
High-efficient high-current converter

A high-efficient high-current converter is optimized to provide a comination of low voltage and high currents to digital equipment featuring a high efficiency factor.

Mission Year: 2014

Mission:

MASCOT

Robotic Asteroid Lander

Category:
Space Missions|Mission Heritage

Learn more

Project:
Lander Supportstruktur

Project:
On-board Computer

Lander’s Central Computer

Mission Year: 2014

Mission:

Sentinel 1A – D

Bereitstellung von Allwetter, Tag und Nacht Versorgung von Erdoberflächenabbildungen

Category:
Space Missions|Mission Heritage

Learn more

Project:
560 H/VP CFRP conductive waveguides per satellite

Project:
Highly rigid CFRP parts

Project:
Thermal highly conductive CFRP parts

Project:
CFRP waveguides and thermally high conductive parts

Following a 3 year development INVENT manufactures raw CFRP waveguides and thermally high conductive CFRP parts for the SAR antennas of TerraSAR-X, Tandem-X and Sentinel 1A + B since 2004. Within these projects INVENT made more than 5.000 CFRP parts for several QMs and FMs.

Mission Year: 2014

Mission:

Slats

Super Low Altitude Test Satellite

Category:
Space Missions|Mission Heritage

Learn more

Project:
Magnetometer

The Magnetometer is an instrument for measuring three-dimensional magnetic fields. It is based on the fluxgate principle, using three independent ring-core sensor heads for each orthogonal axis.

Project:
Magentic Torquer

These devices interact with the Earth’s magnetic field and create control torque, which can be adjusted to the required value. Combined with one or more reaction wheels, they provide all the control you need to maintain your spacecraft’s attitude, from low-Earth orbit up to geo-stationary orbit. And, unlike thrusters, torquers do not need valuable consumables, are low power components and high reliable.

Mission Year: 2014

Mission:

Spot 7

Satellite Pour l'Observation de la Terre

Category:
Space Missions|Mission Heritage

Learn more

Project:
Magentic Torquer

These devices interact with the Earth’s magnetic field and create control torque, which can be adjusted to the required value. Combined with one or more reaction wheels, they provide all the control you need to maintain your spacecraft’s attitude, from low-Earth orbit up to geo-stationary orbit. And, unlike thrusters, torquers do not need valuable consumables, are low power components and high reliable.

Project:
Magnetometer

The Magnetometer is an instrument for measuring three-dimensional magnetic fields. It is based on the fluxgate principle, using three independent ring-core sensor heads for each orthogonal axis.

Mission Year: 2013

Mission:

Alphasat

Largest European doubledeck coms-sat on GEO

Category:
Space Missions|Mission Heritage

Project:
Design and analysis of MGSE

Project:
MLI for an external instrument

Project:
Power Supply Unit

A Power Supply Unit provides conditioned electrical power to an equipment.

Mission Year: 2013

Mission:

BeeSat-2

Space Verification of technologies for picosatellites

Category:
Space Missions|Mission Heritage

Project:
Reaction Wheel Electronics for RW1

Project:
Reaction Wheel RW1

Reaction Wheel to control satellite attitude

Project:
PSL (PicoSatelliteLauncher)

Family of PicoSatellite Launcher (PSL) ensure the safety of the CubeSat and protect the launch vehicle

Mission Year: 2013

Mission:

BeeSat-3

Space Verification of technologies for picosatellites

Category:
Space Missions|Mission Heritage

Project:
Reaction Wheel RW1

Project:
PSL (PicoSatelliteLauncher)

Family of PicoSatellite Launcher (PSL) ensure the safety of the CubeSat and protect the launch vehicle.

Mission Year: 2013

Mission:

IRNSS

Independent navigationsystem India

Category:
Space Missions|Mission Heritage

Learn more

Project:
DC/DC Converter

A DC/DC-Converter converts electrical voltage from a particular level to a different level.

Mission Year: 2013

Mission:

Kent Ridge 1

Microsatellite disaster monitoring Asia

Category:
Space Missions|Mission Heritage

Learn more

Mission Year: 2013

Mission:

Kompsat 5

Korea Multi-Purpose Satellite

Category:
Space Missions|Mission Heritage

Learn more

Project:
Battery Management System

A Battery Management System organises charging and discharging of a battery with the feature to enable longest possible lifetime of the battery in orbit.

Mission Year: 2013

Mission:

OPTOS

Demonstration new technologies in spacecraft development

Category:
Space Missions|Mission Heritage

Learn more

Project:
Reaction Wheel RW1

Reaction Wheel to control satellite attitude

Mission Year: 2013

Mission:

Proba-V

European minisatellite monitoring vegetation each 48 hours

Category:
Space Missions|Mission Heritage

Learn more

Project:
Data Handling Unit

Receiving and formatting of science data

Mission Year: 2013

Mission:

SOMP

Technology Verification and amateur radio satellite of the Techniche Universität Dresden, which is built to the 1U-CubeSat form factor; measurement of atomic oxygen of the upper atmosphere

Category:
Space Missions|Mission Heritage

Learn more

Project:
PSL (PicoSatelliteLauncher)

Family of PicoSatellite Launcher (PSL) ensure the safety of the CubeSat and protect the launch vehicle.

Mission Year: 2013

Mission:

Sprint-A

Spectroscopic Planet Observatory for Recognition of Interaction of Atmosphere

Category:
Space Missions|Mission Heritage

Learn more

Project:
Magentic Torquer

These devices interact with the Earth’s magnetic field and create control torque, which can be adjusted to the required value. Combined with one or more reaction wheels, they provide all the control you need to maintain your spacecraft’s attitude, from low-Earth orbit up to geo-stationary orbit. And, unlike thrusters, torquers do not need valuable consumables, are low power components and high reliable.

Project:
Magnetometer

The Magnetometer is an instrument for measuring three-dimensional magnetic fields. It is based on the fluxgate principle, using three independent ring-core sensor heads for each orthogonal axis.

Mission Year: 2013

Mission:

SWARM

Measuring Earth´s magnetic fields

Category:
Space Missions|Mission Heritage

Learn more

Project:
Heat transfer plate and magnetic torquer frame

INVENT designed and manufactured magnetic torquer (air coil) frames for the SWARM satellites. Further on, thermally high conductive CFRP plates made of K13 pitch fibre were made.

Project:
Heat-conducting plate

Highly thermally conductive CFRP plates made from K13 pitch-based fibers.

Project:
Magentic Torquer

These devices interact with the Earth’s magnetic field and create control torque, which can be adjusted to the required value. Combined with one or more reaction wheels, they provide all the control you need to maintain your spacecraft’s attitude, from low-Earth orbit up to geo-stationary orbit. And, unlike thrusters, torquers do not need valuable consumables, are low power components and high reliable.

Project:
Magnetometer

The Magnetometer is an instrument for measuring three-dimensional magnetic fields. It is based on the fluxgate principle, using three independent ring-core sensor heads for each orthogonal axis.

Mission Year: 2013

Mission:

UWE-3

Experimental satellite; system expansion to attitude control system, test of soft- and hardware designs

Category:
Space Missions|Mission Heritage

Learn more

Project:
Reaction Wheel RW1

Reaction Wheel to control satellite attitude

Mission Year: 2013

Mission:

WNISAT-1

Nanosatellite for north arctic routes and atmosphere monitoring

Category:
Space Missions|Mission Heritage

Learn more

Project:
Reaction Wheel RW1

Reaction Wheel to control satellite attitude

Mission Year: 2012

Mission:

GökTürk-2

Dual use Earth observation satellite, Turkey

Category:
Space Missions|Mission Heritage

Learn more

Project:
Magnetometer

The Magnetometer is an instrument for measuring three-dimensional magnetic fields. It is based on the fluxgate principle, using three independent ring-core sensor heads for each orthogonal axis.

Project:
Magentic Torquer

These devices interact with the Earth’s magnetic field and create control torque, which can be adjusted to the required value. Combined with one or more reaction wheels, they provide all the control you need to maintain your spacecraft’s attitude, from low-Earth orbit up to geo-stationary orbit. And, unlike thrusters, torquers do not need valuable consumables, are low power components and high reliable.

Mission Year: 2012

Mission:

Kompsat 3 Kompsat 3A

Korea Multi-Purpose Satellite

Category:
Space Missions|Mission Heritage

Learn more

Project:
Battery Management System

A Battery Management System organises charging and discharging of a battery with the feature to enable longest possible lifetime of the battery in orbit.

Project:
DC/DC Converter

A DC/DC-Converter converts electrical voltage from a particular level to a different level.

Mission Year: 2012

Mission:

LIDAR ATV 5

Laserinstrument for navigation in Deep Space

Category:
Space Missions|Mission Heritage

Learn more

Project:
COTS Converter

Commercial off the Shelf (ITAR free Converter)

Mission Year: 2012

Mission:

Spot 6

Satellite Pour l'Observation de la Terre

Category:
Space Missions|Mission Heritage

Learn more

Project:
Magentic Torquer

These devices interact with the Earth’s magnetic field and create control torque, which can be adjusted to the required value. Combined with one or more reaction wheels, they provide all the control you need to maintain your spacecraft’s attitude, from low-Earth orbit up to geo-stationary orbit. And, unlike thrusters, torquers do not need valuable consumables, are low power components and high reliable.

Project:
Magnetometer

The Magnetometer is an instrument for measuring three-dimensional magnetic fields. It is based on the fluxgate principle, using three independent ring-core sensor heads for each orthogonal axis.

Mission Year: 2012

Mission:

TET

Microsatellite as test bed

Category:
Space Missions|Mission Heritage

Learn more

Mission Year: 2012

Mission:

URTHECAST

Wordwide first multispectral optical SAR EO constellation

Category:
Space Missions|Mission Heritage

Learn more

Mission Year: 2012

Mission:

VEGA Launcher

Europe´s light launcher

Category:
Space Missions|Mission Heritage

Learn more

Project:
Thermal protection of camera housing

Protection of an external camera against heat from aeroflux during launch.

Mission Year: 2011

Mission:

EGNOS

First secure navigation system of Europe based on GPS, suitable even for ships and planes

Category:
Space Missions|Mission Heritage

Mission Year: 2011

Mission:

Galileo

Europe's navigation system

Category:
Space Missions|Mission Heritage

Learn more

Project:
Magentic Torquer

These devices interact with the Earth’s magnetic field and create control torque, which can be adjusted to the required value. Combined with one or more reaction wheels, they provide all the control you need to maintain your spacecraft’s attitude, from low-Earth orbit up to geo-stationary orbit. And, unlike thrusters, torquers do not need valuable consumables, are low power components and high reliable.

Project:
Magnetometer

The Magnetometer is an instrument for measuring three-dimensional magnetic fields. It is based on the fluxgate principle, using three independent ring-core sensor heads for each orthogonal axis.

Project:
Ground Equipment

Special Check-Out Equimpent for the crypto system

Project:
DC/DC Converter Electronic Power Conditioner

DC/DC Converter Electronic Power Conditioner – converts electrical voltage from a particular level to a different level.

Project:
Aluminum sandwich panels

INVENT manufactured approx. 70 Aluminum/Aluminum sandwich raw panels for the first 14 Galileo satellites.

Mission Year: 2010

Mission:

TanDEM-X

High-fidelity, three dimensional imaging of Earth in consistent quality

Category:
Space Missions|Mission Heritage

Learn more

Project:
CFRP waveguides and thermally high conductive parts

Following a 3 year development INVENT manufactures raw CFRP waveguides and thermally high conductive CFRP parts for the SAR antennas of TerraSAR-X, Tandem-X and Sentinel 1A + B since 2004. Within these projects INVENT made more than 5.000 CFRP parts for several QMs and FMs.

Project:
768 H/VP CFRP waveguides per satellite

Following a three-year development period, INVENT has been manufacturing waveguides and highly conductive CFRP components for the SAR antennas of TerraSAR-X, Tandem-X, and Sentinel-1 since 2004. Within the scope of these projects, INVENT has produced more than 5,000 CFRP components for various qualification models (QMs) and flight models (FMs).

Mission Year: 2009

Mission:

BeeSat-1

Space Verification of technologies for picosatellites

Category:
Space Missions|Mission Heritage

Project:
Reaction Wheel RW1

Reaction Wheel to control satellite attitude

Project:
PSL (PicoSatelliteLauncher)

Family of PicoSatellite Launcher (PSL) ensure the safety of the CubeSat and protect the launch vehicle.

Project:
Reaction wheel electronics for RW1

Project:
Reaction Wheel RW1

Reaction wheel for AOCS

Mission Year: 2009

Mission:

GOCE

ESA's Gravity field and steady-state Ocean Circulation Explorer

Category:
Space Missions|Mission Heritage

Learn more

Mission Year: 2009

Mission:

Herschel

Astronomische Beobachtungen

Category:
Space Missions|Mission Heritage

Learn more

Project:
Isostatic mount

In the frame of the Herschel project INVENT developed and built mechanically high-stressed, but thermally isolating, isostatic mounts, made of CFRP & aluminum. Further on, a thermal strap out of copper and CFRP could be developed. All components work under cryogenic temperatures between 2 and 4 K.

Mission Year: 2009

Mission:

ITÜp-Sat1

Category:
Space Missions|Mission Heritage

Project:
PSL (PicoSatelliteLauncher)

Family of PicoSatellite Launcher (PSL) ensure the safety of the CubeSat and protect the launch vehicle.

Mission Year: 2009

Mission:

SPIRALE A/B

Systeme Preparatoire Infra-Rouge pour l'Alerte

Category:
Space Missions|Mission Heritage

Learn more

Project:
All Cesic Telecope

Mission Year: 2009

Mission:

Swiss-Cube

Launch of a new swiss communication system with satellite and ground station

Category:
Space Missions|Mission Heritage

Learn more

Project:
PSL (PicoSatelliteLauncher)

Family of PicoSatellite Launcher (PSL) ensure the safety of the CubeSat and protect the launch vehicle.

Mission Year: 2009

Mission:

UWE-2

Experimental satellite; system expansion to attitude control system, test of soft- and hardwaredesigns

Category:
Space Missions|Mission Heritage

Learn more

Project:
PSL (PicoSatelliteLauncher)

Family of PicoSatellite Launcher (PSL) ensure the safety of the CubeSat and protect the launch vehicle.

Mission Year: 2008

Mission:

ATV

Europe´s automatic service craft to supply the ISS

Category:
Space Missions|Mission Heritage

Mission Year: 2008

Mission:

RapidEye

Space based geo information

Category:
Space Missions|Mission Heritage

Learn more

Project:
Power Distribution Unit

A Power Distribution Unit distributes electrical energy into a complete instrument or satellite.

Project:
DC/DC Converter

DC/DC Converter Electronic Power Conditioner – converts electrical voltage from a particular level to a different level.

Mission Year: 2008

Mission:

SAR-Lupe

Military observation satellite German Bundeswehr

Category:
Space Missions|Mission Heritage

Learn more

Project:
Kryptosystem

On-board and Ground Crypto System

Mission Year: 2007

Mission:

ANITA

Instrument monitoring air on ISS

Category:
Space Missions|Mission Heritage

Project:
Definition of line shape stability and optical alignment requirements

Mission Year: 2007

Mission:

International Space Station (ISS)

International Space Station

Category:
Space Missions|Mission Heritage

Learn more

Project:
Struktural analysis of payload devices

Project:
Fracture control engineering for ACLS rack

Project:
Capillary Channel Flow Electrical Subsystem for ISS

Power Supply for an experiment

Project:
Over Temperature External Electronics Box for ISS

Over temperature protection switch

Mission Year: 2007

Mission:

LAPAN-TubSat (2005)

Earth observation Satellit of TU berlin and Indonesian space agency LAPAN

Category:
Space Missions|Mission Heritage

Learn more

Project:
GSE (Ground Support Equipment) for small satellites

Ground Support Equipment / tailored transport container for a safe transport of satellite

Mission Year: 2007

Mission:

Lunar Exploration Orbiter

Lunar Exploration Orbiter

Category:
Space Missions|Mission Heritage

Learn more

Project:
Mission analysis, trajectory optimisation, life time prediction

Mission Year: 2007

Mission:

Radarsat

Canada's next-generation commercial radar satellite

Category:
Space Missions|Mission Heritage

Learn more

Project:
Magentic Torquer

These devices interact with the Earth’s magnetic field and create control torque, which can be adjusted to the required value. Combined with one or more reaction wheels, they provide all the control you need to maintain your spacecraft’s attitude, from low-Earth orbit up to geo-stationary orbit. And, unlike thrusters, torquers do not need valuable consumables, are low power components and high reliable.

Project:
Magnetometer

The Magnetometer is an instrument for measuring three-dimensional magnetic fields. It is based on the fluxgate principle, using three independent ring-core sensor heads for each orthogonal axis.

Mission Year: 2007

Mission:

TerraSAR-X

Spaceborne radar sensors for EO

Category:
Space Missions|Mission Heritage

Learn more

Project:
Magentic Torquer

These devices interact with the Earth’s magnetic field and create control torque, which can be adjusted to the required value. Combined with one or more reaction wheels, they provide all the control you need to maintain your spacecraft’s attitude, from low-Earth orbit up to geo-stationary orbit. And, unlike thrusters, torquers do not need valuable consumables, are low power components and high reliable.

Project:
Magnetometer

The Magnetometer is an instrument for measuring three-dimensional magnetic fields. It is based on the fluxgate principle, using three independent ring-core sensor heads for each orthogonal axis.

Project:
CFRP waveguides and thermally high conductive parts

Following a 3 year development INVENT manufactures raw CFRP waveguides and thermally high conductive CFRP parts for the SAR antennas of TerraSAR-X, Tandem-X and Sentinel 1A + B since 2004. Within these projects INVENT made more than 5,000 CFRP parts for several QMs and FMs.

Mission Year: 2007

Mission:

THEMIS / ARTEMIS

Five NASA satellites (THEMIS A through THEMIS E) studied energy releases from Earth's magnetosphere known as substorms, magnetic phenomena that intensify auroras near Earth's poles.

Category:
Space Missions|Mission Heritage

Learn more

Project:
Magnetometer

Electronics development of first magnetometer utilizing a self-developed RISC processor.

Mission Year: 2007

Mission:

Tubsat

Microsatellit of TU Berlin

Category:
Space Missions|Mission Heritage

Learn more

Project:
Magnetometer

The Magnetometer is an instrument for measuring three-dimensional magnetic fields. It is based on the fluxgate principle, using three independent ring-core sensor heads for each orthogonal axis.

Project:
Magentic Torquer

These devices interact with the Earth’s magnetic field and create control torque, which can be adjusted to the required value. Combined with one or more reaction wheels, they provide all the control you need to maintain your spacecraft’s attitude, from low-Earth orbit up to geo-stationary orbit. And, unlike thrusters, torquers do not need valuable consumables, are low power components and high reliable.

Mission Year: 2006

Mission:

MetOp

Metop is a series of three polar orbiting meteorological satellites

Category:
Space Missions|Mission Heritage

Learn more

Mission Year: 2006

Mission:

SatCom BW

Satellitesystem German Bundeswehr, among others for communications with troups abroad

Category:
Space Missions|Mission Heritage

Learn more

Mission Year: 2005

Mission:

Cryosat

ESA’s CryoSat mission is dedicated to measuring the thickness of polar sea ice and monitoring changes in the ice sheets that blanket Greenland and Antarctica.

Category:
Space Missions|Mission Heritage

Mission Year: 2005

Mission:

ROKVISS

Lightweighed telerobotic system

Category:
Space Missions|Mission Heritage

Learn more

Mission Year: 2005

Mission:

Venus Express

Mapping of the Venus

Category:
Space Missions|Mission Heritage

Learn more

Project:
PFS Planetary Fourier IR Spectrometer

Instrument for infrared spectroscopy; informations about the nature of atmosphere

Project:
Magnetometer

The Magnetometer is an instrument for measuring three-dimensional magnetic fields. It is based on the fluxgate principle, using three independent ring-core sensor heads for each orthogonal axis.

Mission Year: 2004

Mission:

MFP-Satellit

Multifunctional Plattform Satellite EADS

Category:
Space Missions|Mission Heritage

Project:
Development of a solar sail

Mission Year: 2004

Mission:

Rosetta

Comet chaser with Lander

Category:
Space Missions|Mission Heritage

Learn more

Project:
MUPUS Thermal Mapper und ROLIS

measuring the mechanical and thermal properties of external comet layers

Mission Year: 2003

Mission:

Double Star

Satellite based space mission by CNSA and ESA –> investigation of Earth's magnetic field and the interaction with solar wind

Category:
Space Missions|Mission Heritage

Project:
Deployable Booms for satellites

As the outer segments and the complete boom fold out separately, there are only two degrees of freedom during each fold-out procedure; only three degrees of freedom in the case of spin-stabilized satellites.
The design principle of the Double Star boom can be adapted to a variety of spinstabilized satellites. A concept for an active, springdriven deployment, using redundant deployment springs at the hinges is available for non-spinning satellites.
Both versions can be realized either with one or two boom segments. The length of the deployed boom can be extended to more than four meters, depending on the dimensions of the spacecraft and on the mass to be deployed.

Project:
Magnetometer

The Magnetometer is an instrument for measuring three-dimensional magnetic fields. It is based on the fluxgate principle, using three independent ring-core sensor heads for each orthogonal axis.

Mission Year: 2003

Mission:

Mars NetLander Mission

Exploration of Mars

Category:
Space Missions|Mission Heritage

Learn more

Project:
Studies with camera systems

Research stations on the Mars should collect scientific information.

Mission Year: 2001

Mission:

BIRD

Infrared Earth Observation for fire fighting

Category:
Space Missions|Mission Heritage

Project:
Reaction Wheel RW90

Reaction Wheel to control satellite attitude

Mission Year: 2001

Mission:

MAROCSAT

Satellit für Forschung und Erdbeobachtung

Category:
Space Missions|Mission Heritage

Learn more

Project:
GSE (Ground Support Equipment)

Tailored transport container for a safe transport of satellite.

Mission Year: 2001

Mission:

Meteor M3

Series of 9 Russian sunsynchronous weather sats

Category:
Space Missions|Mission Heritage

Learn more

Project:
Battery and Battery Management System

A Battery Management System organises charging and discharging of a battery with the feature to enable longest possible lifetime of the battery in orbit.

Mission Year: 1999

Mission:

Shenzhou

First astronautical space ship of China

Category:
Space Missions|Mission Heritage

Learn more

Project:
Electronic Power Conditioner (EPC) for space communication

An EPC provides the electrical power for a Communication Tube (eg. TWT, Klystron). The output voltage varies between 20 Volt and 20.000Volt.

Mission Year: 1997

Mission:

CASSINI Mission

Exploration of Saturn and it´s moons

Category:
Space Missions|Mission Heritage

Project:
Cosmic Dust Analyzer (CDA)

Analysis of ice and dust grains in and near the Saturn system.

Mission Year: 1997

Mission:

Equator-S

EQUATOR-S is a low-cost mission designed to study the Earth's equatorial magnetosphere out to distances of 67.000 km.

Category:
Space Missions|Mission Heritage

Learn more

Mission Year: 1996

Mission:

MARS ’96 Mission / Mars 8

Exploration of Mars

Category:
Space Missions|Mission Heritage

Learn more

Project:
PFS Planetares Fourier IR Spektrometer

Instrument for infrared spectroscopy; informations about the nature of atmosphere.

Project:
WAOSS Stereo Kamera

WAOSS stereo camera (Wide-Angle Optoelectronic Stereo Scanner) global topographical mapping with good ground resolution.

Mission Year: 1995

Mission:

IRS-C Satellit

Earth observation to support the national economy of India (agricultur, water resources, forestry…)

Category:
Space Missions|Mission Heritage

Learn more

Project:
MOS (Modulare Optical Spectrometer)

Studies of material properties of solid states.

Mission Year: 1986

Mission:

Raumstation MIR

Manned space station of the Sowjetunion, orniting Earth from 1986-2001.

Category:
Space Missions|Mission Heritage

Learn more

Mission Year: n.a.

Mission:

SPIRALE A

Doppelsat-System EO with telescopes made from highly innovative new materials

Category:
Space Missions|Mission Heritage

Learn more

Project:
All Cesic Telecope